Send Email
Send SMS
Search
Ramakant Industries
Ramakant Industries


Tube Mill

Manufacturer & Supplier of Tube Mill. Our product range also comprises of Roll Forming Machine, Purlin Roll Forming Machine and Roll Forming Equipment.

Tube Mill

REQUEST CALLBACK

Tube Mill
Ask for Price

We are one of the reputed organizations engaged in offering Tube Mill in the market. It is used for drying and as the fuel transport medium, and by regulating it the mill output is regulated. Governed by the pulverized fuel outlet temperature requirement, the cold air and hot air dampers are regulated to achieve the correct primary air temperature. In addition to raising the coal temperature inside the mill for drying and better grinding, the same air works as the transport medium to move the pulverized coal out of the mill.

Features:

  • Light in weight
  • Optimum performance
  • Rust Proof

Other Details:

  • D coiler 1 ton cap
  • Entry Gate with
  • Roll Forming Line with 10 stations, 10 Gear Boxes & 15 H.P. electrical
  • Control Panel semi auto
  • Cutting Unit Manually


Technical Specifications:


  • Maximum sheet width that can be formed: 370 mm
  • Maximum sheet thickness in S.S. Strips that can be formed:2 mm
  • Horizontal distance between shafts: 500mm
  • Number of forming stations: 10nos
  • Vertical station: 8 nos
  • Total HP for Line: 18
  • Speed of the machine: 500mm/minute
  • Size of machine: 5500 x 1300 x 1100 mm


Mandrel Uncoiler:

  • Coil weight: 1 MT Max
  • Coil width: 400 MM
  • Coil bore: 470 MM min, 520 MM max dia
  • Mandrel movement: Manually


Entry Gate:


  • Entry gate will be provided for movement of sheet to roll former


Main Base:


  • The main base is MS fabricated structure and adequately ribbed to minimize the distortion
  • It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.


Mill stands (Station):


  • The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine
  • Each forming head consists of a fixed housing and sliding type out board housing
  • The mill stands will be arranged to locate shafts mounted on taper bearings
  • For the top shafts the bearings are housed in the cartridge type bearing blocks
  • The bottom shaft bearings are located in the bored machined in the housings
  • The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings


Roll shafts:


  • The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling


Drive:

 

  • The drive to the roll former will be by means of a gear box system
  • The main drive will be provided by means of 15HP motor



Yes! I am interested

 
X


Call Us: +91-8071804776
Ramakant Industries
Sanjay Vishwakarma (Proprietor)
p.n-88,s.n 58,sai industrial area,chovisawadi charoli ,
Pune - 412105, Maharashtra, India
Contact via E-mail
Contact via SMS



Home  |   Profile   |  Products & Services  |  Site Map  |   Contact Us   |   Mobile Site

© Ramakant Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Ramakant Industries