Roll Forming Machine

Approx. Rs 25,00,001 / PieceGet Latest Price

Approx. Rs 24,00,001 / PieceGet Latest Price

• D coiler 10 ton cap.
• Punching press 100 tone
• Entry Gate with
• Roll Forming Line with 16 station , 8 Gear Boxes & 15 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

• Maximum sheet width that can be formed : 850 mm
• Maximum sheet thickness in CRCA Strips that can be formed : 5 mm(M.S.)
• Horizontal distance between shafts : 500mm
• Number of forming stations : 16 nos.
• Vertical station : 12 nos.
• Total HP for Line : 23
• Speed of the machine : 3 to 4 mt/minit
• Size of machine : 8500 x 1600 x 1000 mm

• Coil weight : 10MT Max
• Coil width : 400 MM
• Coil bore : 850 MM min, 1100 MM max dia.
• Mandrel movement : Hydro.
• Back Tension : Manually adjusted

• 100 tone Hydro. press
• 5 HP
• Oil tank 150 liter

• Entry gate will be provided for movement of sheet to roll former.

• The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

• The roll shafts dia. 70 mm will be manufactured from quality steel and will be keyed to locate tooling.

• The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 15 HP motor

• One set of Tooling with EN31 / D3 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining trial and hardening ,bore grinding and inspection with final template for above.

• Hydraulically operated power pack along with cutting die with 3 HP electrical.

Approx. Rs 20,00,000 / PieceGet Latest Price

• Sturdy construction
• Low maintenance
• Corrosion resistance

Approx. Rs 20,00,000 / PieceGet Latest Price

• Various sizes
• High durability
• Low maintenance

Approx. Rs 24,00,000 / PieceGet Latest Price

• Flawless operation
• High durability
• Light weight

• De coiler 2 ton cap
• Entry Gate with
• Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical
• Control Panel semi auto
• Cutting Unit

• Maximum sheet width that can be formed: 600 mm
• Maximum sheet thickness in G I Strips that can be formed: 1mm
• Vertical distance between shafts: 100 mm
• Horizontal distance between shafts: 190 mm
• Number of forming stations: 9 nos
• Vertical station: 7 nos
• Total HP for Line: 5 (ABB)
• Speed of the machine: 4mt/minute
• Size of machine: 1600 x 800 x 1100 mm

• Coil weight: 2 MT Max
• Coil width: 600 MM
• Coil bore: 450 MM min, 510 MM max dia
• Mandrel movement: Manually adjusted
• Back Tension: Manually adjusted

• Entry gate will be provided for movement of sheet to roll former

• The main base is MS fabricated structure and adequately ribbed to minimize the distortion
• It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine.
• Each forming head consists of a fixed housing and sliding type out board housing
• The mill stands will be arranged to locate shafts mounted on taper bearings
• For the top shafts the bearings are housed in the cartridge type bearing blocks
• The bottom shaft bearings are located in the bored machined in the housings
• The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings

• The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling

• The drive to the roll former will be by means of a gear box system
• The main drive will be provided by means of 3 HP motor

• One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
• The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above

• Hydro press (with dais 4 set )
• GEAR BOX – ELECON
• Motor – ABB
• Bearing -SKF

Additional Information:

• Item Code: 6505
• Production Capacity: 1000 nos /day
• Delivery Time: 1 month

Approx. Rs 14,50,001 / PieceGet Latest Price

• Maximum sheet width that can be formed : 450mm
• Maximum sheet thickness in CRCA Strips that can be formed : 3 mm(M.S.)
• Horizontal distance between shafts : 400mm
• Number of forming stations : 14 nos.
• Vertical station : 12 nos.
• Total HP for Line : 16
• Speed of the machine : 4mt/minit
• Size of machine : 6300 x 1200 x 1000 mm

• Coil weight : 10 MT Max
• Coil width : 400 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

• 20 tone power press
• 2 nos. 3 HP

• Entry gate will be provided for movement of sheet to roll former.

• The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

• The roll shafts dia. 55mm will be manufactured from quality steel and will be keyed to locate tooling.

• The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 10 HP motor

• One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

• Hydraulically operated power pack along with cutting die with 3 HP electrical.

Approx. Rs 20,00,001 / PieceGet Latest Price

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming Line with 18 stations, 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

• Maximum sheet width that can be formed : 1250 mm
• Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
• Horizontal distance between shafts : 500mm
• Number of forming stations : 16 nos.
• Total HP for Line : 8
• Speed of the machine : 10 -14 mt / mint
• Size of machine : 9500 x 1700 x 1100 mm

• Coil weight : 5 MT Max
• Coil width : 1250 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

• Entry gate will be provided for movement of sheet to roll former.

• the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

• The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

• The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

• One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

• Hydraulically operated power pack along with cutting die with 3 HP electrical.

Additional Information:

• Production Capacity: unlimited
• Delivery Time: 30 days

Approx. Rs 24,00,000 / PieceGet Latest Price

Approx. Rs 30,00,001 / PieceGet Latest Price

Approx. Rs 20,00,001 / pieceGet Latest Price

• Accurate dimension
• Robust in design
• Long service life

Approx. Rs 4,50,001 / PieceGet Latest Price

Approx. Rs 20,00,000 / PieceGet Latest Price

• D coiler 2 ton cap.
• Entry Gate with
• Roll Forming Line with 12 station , 1 Gear Boxes & 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

• Maximum sheet width that can be formed : 1550mm
• Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
• Horizontal distance between shafts : 400mm
• Number of forming stations : 12 nos
• Vertical station : 11 nos
• Total HP for Line : 13
• Speed of the machine : 7 mt./minute
• Size of machine : 6500 x 1100 x 1100 mm

• Coil weight : 2 MT Max
• Coil width : 1200 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

• Entry gate will be provided for movement of sheet to roll former.

• The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

• The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.

• The drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 HP motor

• One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

• Hydraulically operated power pack along with cutting die with 3 HP electrical.
• Motor-ABB
• Gear box - Elecon
• Bearing - SKF

Approx. Rs 22,00,000 / PieceGet Latest Price

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming Line with 18 station , 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

• Maximum sheet width that can be formed : 1450 mm
• Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
• Horizontal distance between shafts : 500mm
• Number of forming stations : 18 nos.
• Total HP for Line : 15
• Speed of the machine : 10 -14 mt / minute
• Size of machine : 9500 x 1700 x 1100 mm

• Coil weight : 5 MT Max
• Coil width : 1450 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

• Entry gate will be provided for movement of sheet to roll former.

• The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

• The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

• The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

• The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

• One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

• Hydraulically operated power pack along with cutting die with 3 HP electrical.